Crestamould RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity,improved shrinkage control and is catalysed with standard MEKP catalyst. Crestamould RTR 4010PA is a thixotropic, filled, low profile resin for hand-lay mould making applications.
Crestamould RTR 4010PA helps to achieve faster mould making and eliminates surface distortion, forming part of our new mould making system, which also comprises Crestamould Gelcoat 15PA. Applications Crestamould® RTR 4010PA is designed for hand-lay applications and must be allowed to attain a minimum workshop temperature of 18°C before use (20°C - 24°C is recommended). It should be mixed thoroughly prior to use and requires only the addition of MEKP catalyst to start the curing reaction. The recommended catalyst is Catalyst M (or Butanox® M50), which should be added at 1% into the resin and thoroughly dispersed. The recommended resin-to-glass ratio for chopped strand mat glass reinforcement is at least 3-to-1 by weight. Although Crestamould® RTR 4010PA is designed for hand lay application, it can also be spray applied. Please contact the Scott Bader Technical Service department if further information is needed. The design, complexity and size of the mould will determine optimum reinforcement levels and thickness. At least 3 layers of 450gsm chopped strand glass mat, or equivalent, is required and should be applied in a single operation consolidating between layers, to achieve sufficient cure and low shrink performance. The material will undergo a colour change becoming whiter as the curing reaction takes place.
Customer Reviews5.05 5.0/5 Based on 1 review
Good stuffReviewed by Info on 15 Apr 2025
Time saver when making molds. No longer have to wait for resin to cure after each layer, this can lay up 4 or 5 layers all in one go. Doesn’t shrink, and I add a bit extra aluminium powder for extra heat resistance!
Fibreglass Supplies use Royal Mail, APC Overnight and the National Hazardous Pallet Network for our Next Day Delivery Services.
Royal Mail
Orders of up to 2kg will usually be sent using a Royal Mail First Class Service for National Next Day Delivery.
APC Overnight
Orders over 2kg and up to 30kg will be sent using a Fully Tracked Next Day Service using APC Overnight. Some smaller Roofing Kits that weigh up to 30kg in Total would be sent on this service. This includes Resins, Gelcoats and Topcoats which are classed as Hazardous and are decanted into 5kg Tins or Pales to comply with the Transportation of Hazardous Goods Act.
Pallet Network
All our larger orders by weight would usually be sent using the National Pallet Network. Non Hazardous Items can be sent using either the Pallet Network or APC Overnight.
All Hazardous goods over 30kg (which includes Roofing Kits over 30kg in total weight) are usually sent using the National Pallet Network on a Fully Trackable Next Day Delivery Service.
Click & Collect
All orders are eligible for Click & Collect. Pick up your items conveniently from our Cattedown Store, available Monday to Friday between 7:30 am and 4:30 pm (excluding Bank Holidays).
NB - Please note that our Direct Control of the Delivery Element extends to making sure we pick pack and dispatch all orders on time. As we have no Direct Control over the performance of any individual courier we would not be responsible for refunds due to the late arrival of any order.
We always work hard with customers to overcome any issues that arise so please call us if you do have any concerns with regard to tight delivery deadlines so that we can provide great advice if needed.
Please read our Returns policy laid out below.
Under the Consumer Contracts Regulations 2014 you are entitled to return goods within 14 days of delivery for a refund of the cost of the goods. The delivery costs and any packaging are not included in the refund. The returned goods should be in the original containers and unopened. It is the customers responsibility to pay for the cost of returning goods to our Business Premises.
Some of our products are made to order and as such once ordered are non refundable and non returnable. These include coloured gelcoats, topcoats and resins.
These Consumer Regulations do not apply to business purchases (B2B). However we will always help in any way and look to find a suitable and mutually acceptable solution should any issues arise through the order process.
It is the customers responsibility to understand the suitability of the product before its use. Technical and Safety Data Sheets are available for all products where applicable. These can be found on most product description pages or if not are available on request. If you are unsure please do not hesitate to contact us for expert advice and product suitability and application.
To organise a return please contact us on the following.
