A specially formulated all-in-one moisture cured polyurethane sealer for sealing concrete rendered ponds under the water line, Prymax Marine Clear Seal should be used above the waterline and for paving around the pond.
For damp proofing internal render, plaster, plasterboard and sealing dusty concrete floors, can be used externally on walls if overpainted to protect from UV. Can be used to coat internal woodwork.
Advantages:
One pack, ready for use.
Hard wearing, durable and long lasting.
Non-absorbent, easily cleaned reducing maintenance.
Unaffected by water, oils and most common chemicals
Quick and easy application.
Technical information:
Prymax Pond and Damp sealer is designed to be applied in 3 thin coats with the second and third coats being applied when the previous coat is tacky to touch, for colours 2 coats of clear followed by 2 coats of colour all applied within 3 hours of each other, if more than 3 hours has elapsed then it must be left for 24 hours and sanded down before applying further coats.
Coverage: 3 coats of clear 500gms for the 3 coats, for colour 400gms of clear for 2 coats and 400gms of colour for 2 coats.
Drying Time: 45 60 minutes @ 20 Degrees C / 70% relative humidity
Full Cure & Chemical resistance: 72 hours Light
Traffic: 12 hours
Shelf Life: 24 months in unopened sealed container, once opened product will begin to cure.
Flash Point: 27
Viscosity: 250-500 cps Specific
Gravity: 0.95
Cleaning: Clean equipment with Prymax thinners, prymax cleaner or acetone
Preparation: All surfaces to be coated must be dry and porous new concrete render should be given 21- 28 days to fully cure before coating, if a water proofer has be added to render sand down surface to obtain a key and remove residual water proofer, repair any cracks in the surface before coating, remove any loose plaster.
Limitations: Prymax Pond / Damp Sealer is not recommended for hard dense tiles or power floated floors, bitumen, rubber, vinyl and other plastic flooring.
Code: 9
Fibreglass Supplies use Royal Mail, APC Overnight and the National Hazardous Pallet Network for our Next Day Delivery Services.
Royal Mail
Orders of up to 2kg will usually be sent using a Royal Mail First Class Service for National Next Day Delivery.
APC Overnight
Orders over 2kg and up to 30kg will be sent using a Fully Tracked Next Day Service using APC Overnight. Some smaller Roofing Kits that weigh up to 30kg in Total would be sent on this service. This includes Resins, Gelcoats and Topcoats which are classed as Hazardous and are decanted into 5kg Tins or Pales to comply with the Transportation of Hazardous Goods Act.
Pallet Network
All our larger orders by weight would usually be sent using the National Pallet Network. Non Hazardous Items can be sent using either the Pallet Network or APC Overnight.
All Hazardous goods over 30kg (which includes Roofing Kits over 30kg in total weight) are usually sent using the National Pallet Network on a Fully Trackable Next Day Delivery Service.
NB - Please note that our Direct Control of the Delivery Element extends to making sure we pick pack and dispatch all orders on time. As we have no Direct Control over the performance of any individual courier we would not be responsible for refunds due to the late arrival of any order.
We always work hard with customers to overcome any issues that arise so please call us if you do have any concerns with regard to tight delivery deadlines so that we can provide great advice if needed.
Please read our Returns policy laid out below.
Under the Consumer Contracts Regulations 2014 you are entitled to return goods within 14 days of delivery for a refund of the cost of the goods. The delivery costs and any packaging are not included in the refund. The returned goods should be in the original containers and unopened. It is the customers responsibility to pay for the cost of returning goods to our Business Premises.
Some of our products are made to order and as such once ordered are non refundable and non returnable. These include coloured gelcoats, topcoats and resins.
These Consumer Regulations do not apply to business purchases (B2B). However we will always help in any way and look to find a suitable and mutually acceptable solution should any issues arise through the order process.
It is the customers responsibility to understand the suitability of the product before its use. Technical and Safety Data Sheets are available for all products where applicable. These can be found on most product description pages or if not are available on request. If you are unsure please do not hesitate to contact us for expert advice and product suitability and application.
To organise a return please contact us on the following.