The Mirka AUTONET 150mm Sanding Disc is a type of abrasive disc specifically designed for sanding and surface preparation. Mirka, a leading manufacturer of abrasives and sanding tools, produces the AUTONET line of products, which includes sanding discs for various applications.

The AUTONET sanding discs are known for their innovative design and high-quality construction. They feature a patented net-like structure that provides several advantages over traditional sanding discs. The net structure allows for optimal dust extraction, resulting in a cleaner working environment and better visibility of the sanding surface. It also prevents clogging of the abrasive material, leading to longer disc life and consistent sanding performance.

The 150mm size refers to the diameter of the sanding disc, which is approximately 6 inches. This size is commonly used in automotive refinishing, woodworking, and other applications where a larger sanding area is required.

Mirka AUTONET 150mm Sanding Discs are available in various grit sizes, allowing you to choose the appropriate level of abrasiveness for your specific sanding needs. They are typically used with random orbital sanders or other sanding equipment that accepts hook-and-loop (Velcro) attachments.

The testimonials below give a great idea of the overall performance and suitability of these sanding discs.

“We use the Autonet 150mm sanding disc to finish our Epoxy River Tables. We go up through the grits using a variety of abrasive grades. Epoxy Resin when cured is an extremely hard material and the Autonet Discs handle this challenge with ease. We have used various brands but find we go through far fewer of the Mirka products. The other impressive feature is that these ceramic discs are of a mesh construction and it makes such a difference to dust extraction, clogging and a cleaner overall working environment.”

“I've been in the restoration business for over 35 years and this product works very well on wood. It out performs regular sandpaper disc's, it cuts much longer and holds up well when sanding over rough splintered wood without shredding apart. Would highly recommend for wood sanding”

“Mirka is well known for their sanding products and I have used their sanding disk for years but as with any sanding disk you always have the problem of clogging and dust. As an answer to this Mirka has a line of disk that look like window screening and virtually eliminate dust if you are using a good vacuum with your sander (more on this later). Following are a couple of images of a sanding disk.”

“In this line the most common offerings are the Autonet, Abranet, Abralon disk. As you shop around you will find this line offering 3", 5", 6", rolls and pads for most of the different offerings. Autonet disk are intended for auto body work but in my test they performed as good as the Abranet (these were developed for woodworking) on wood and when you purchase the Autonet usually they are a few pounds cheaper. I normally purchase 6" disk in boxes of 50 disk and I estimate that these disks out last normal sandpaper disk by 5-10.”

“In my initial test on some scrap pine I use 120 grit Abranet and Autonet on my sander and sanded an equal amount of time and attempted to sand the same amount of material. I could not tell any difference between the two areas. In general the Autonet are less expensive so I've started purchasing the Autonet.”

• Autonet grit range - P80, P120, 150, P180, P240, P320, P400, P500, P600, P800
• Abranet grit range - P80-P180, P240, P320-P1000

As long as you have Hook & Loop pads these disk will work on your sander. We sell the Mirka Autonet 150mm Disc and our prices are some of the best on the internet so follow the link if you would like to purchase some - Mirka 150mm Autonet Sanding Discs


Post By Holly

Categories