Release Systems

Release Systems generally used for easy removal of a Fibreglass Part from a Mould. We have a selection of Mould Release Systems depending on the application and properties of your project. Please call for advice if you are not sure of which is best suited to your project.
Showing 16 of 16 results
  • Loctite Frekote 700 NC 5 ltr

    Loctite Frekote 700 NC 5 ltr

    LOCTITE FREKOTE 700NC is a clear, solvent-based, moisture-curing release epoxy for most advanced composites and also polyester resins.
  • Loctite Frekote WOLO - 5 ltr

    Loctite Frekote WOLO - 5 ltr

    Loctite Frekote WOLO is a unique polymer release agent that cures quickly and provides multiple release of all polyester resins. Application and use of a release agent has never been easier, simply wipe on and leave on to produce a high gloss finish with no need to polish.
  • Loctite Frekote 770 NC 5 ltr

    Loctite Frekote 770 NC 5 ltr

    LOCTITE FREKOTE 770NC is a clear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts.
  • Loctite Frekote FRP - NC 5 Litre Can

    Loctite Frekote FRP - NC 5 Litre Can

    Loctite Frekote FRP-NC is a semi-permanent release interface specifically formulated for reinforced polyester gel coats. It provides minimal mould build-up thus eliminating buffing and cleaning between applications.
  • Mirror Glaze Release Wax Meguiars No.8

    Mirror Glaze Release Wax Meguiars No.8

    Meguiars Mirror Glaze M-08 Mould Release Wax has been rebranded to Miracle Gloss but is the very same tried and tested release wax Mirror Glaze that we all know and love.
  • PVA Release Agent

    PVA Release Agent

    PVA is a traditional mould release agent (not the same as PVA glue!) and can be wiped on or sprayed onto a wide range of pattern and mould surfaces to provide a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites.
  • R5 Wax Based Aerosol Release Agent

    R5 Wax Based Aerosol Release Agent

    R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface.
  • R7 Release Agent

    R7 Release Agent

    R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface.
  • Slick Release Wax

    Slick Release Wax

    Slick wax mould release is a blend of high performance agents and carnauba wax. Easy to apply, long lasting and paerfect for new and old moulds. Get more releases per applictions, less wax build up and better moulding finishes.
  • Honey Wax Mould Release - 397g

    Honey Wax Mould Release - 397g

    Premium carnauba based paste moUld release agent. Industry standard since 1985 that is extremely easy to wipe off. Honey Wax reduces man hours due to its exceptional ease of application and buffing.
  • Resin Barrier / Release Tape 50mm

    Resin Barrier / Release Tape 50mm

    High quality release tape designed specifically for use as a barrier or release tape for polyester or epoxy resin. Totally non stick to resin this tape is smooth, strong and will not stretch. The perfect non stick surface.
  • Demoulding Wedge 250x80x25mm

    Demoulding Wedge 250x80x25mm

    Demoulding Wedge 250 x 80 x 25mm. For use when releasing parts from large Moulds where a firm wedge is needed.
  • Flexible Demoulding Wedge 250x80x25mm

    Flexible Demoulding Wedge 250x80x25mm

    Flexible Demoulding Wedge 250 x 80 x 25mm. For use when releasing parts from large Moulds where a slightly flexible wedge is needed.
  • Thin Release Wedge - 250x45x20

    Thin Release Wedge - 250x45x20

    Thin Demoulding Wedge. For use when releasing parts from Moulds where a more complicated parts may benefit from a slimmer wedge. 250x45x20
  • Small Demoulding Wedge 150x50x18mm

    Small Demoulding Wedge 150x50x18mm

    Small Demoulding Wedge 150x50x18mm. For use when releasing parts from large Moulds where a firm wedge is needed.
  • Compact Demoulding Wedge - 100x37x12mm

    Compact Demoulding Wedge - 100x37x12mm

    Compact Demoulding Wedge 100 x 38 x 12mm. For use when releasing parts from much smaller Moulds where a firm wedge is needed.