Polyester Brush Gelcoat GT600 - RAL 1032 Broom Yellow
NB - Colours shown above are for reference only and not to be used to colour match. Please refer to a RAL Colour Chart for Colour Matching.
Crystic Gelcoat GT-600 is a high performance isophthalic gelcoat. It is pre-accelerated and formulated for brush application. Crystic Gelcoat GT-600 has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.
Crystic Gelcoat GT-600 is recommended for use in the marine, building and transport industries and is approved by Lloyds Register of Shipping. It is suitable for general moulding manufacture, gelcoat repairs and GRP Applications.
GelTint offers the latest in pigment and gelcoat technology producing a high quality product for ease of use, finish and longevity. There is a vast range of colours available. Custom colour matching is also available with a lead time of 5 - 7 working days. Please call us on 01752 658498 for any bespoke enquiries.
Packaging and Storage
This product is supplied in 1kg, 5kg, 10kg and 20kg with very slight variations dependant on individual colours - The amount of base gelcoat will be increased by a small percentage with the addition of the pigment. Product should be stored in its original container, under cover, and out of direct sunlight. These must be kept closed and airtight. It is recommended that the storage temperature should be less than 25°C and the product should not be frozen. Storing the product outside of these conditions may affect the properties of the product and reduce its shelf life. Ideally, containers should be opened only immediately prior to use. Material should be used within 5 months from date of production.
Health and Safety
Read and understand separate Material Safety Data Sheet before using this product. Unsaturated polyester products release heat when they cure in bulk.