Fuel Tank Sealer - Chemical Resistant Epoxy Resin

FTS3000 Fuel Tank Sealer / Liner. FTS3000 is a Chemically Resistant Epoxy Resin System.

Premium Quality Chemically Resistant 2 part Epoxy Resin Tank Sealer and Liner. Ideally suited for sealing Petrol Tanks or Water Tanks. Suitable for Motorcycles, Boats and Vintage Cars. Seals leaking seams, small cracks, pin holes and stops further corrosion. Highly Chemical Resistant Epoxy Resin

Size Coverage Ratio. Please see below for the size of kit you need.

250ml - Up to 10 Litres
625ml - Up to 25 Litres
1250ml - Up to 50 Litres
1875ml - Up to 70 Litres
2500ml - Up to 100 Litres

Kits Includes

Your Kit will include 100 parts of A and 25 Parts of B in your FTS3000 Kit. 

Product Features

- Top Quality Petrol Tank Sealer and Liner
- Low Visocosity
- Very Low Shrinkage
- Easliy Installed Using the Slush Casting Method
- Highly Chemical Resistant
- Seals Pin Holes, Seams, Small Cracks and Pitted Surfaces
- 24hr Curing Time
- Post Curing Capability for Increased Temperature Resistance
- Can be Painted on your Substrate
- Perfect for Water Tanks

Mixing Ratio

FTS3000 is very easy to use and is mixed in a ratio of 100 to 25 by weight. Using a set of digital scales this resin is easily measured. Mix Part A and Part B well prior to your pour.

Curing Time

Full Cure time of 24hrs. This Resin is best used at a working temperature of 18 degrees.

Please ensure that your project or substrate is free of dust and any oily residue. Your project needs to be completely moisture free.

Application

PTS3000 Can be applied with a brush once Part A and Part B have been mixed well.

Slush Method. Mix PTS3000 well and then pour into your petrol tank. Shake well for a couple of minutes and then rotate through 360 degrees slowly for around 15 - 20 minutes to coat the inside your petrol tank. Remember to reseal the petrol tank lid so the resin is fully contained prior to starting the Slush Method Process.

Working Safely

Protective clothing and eye protection should be worn when using the resin and catalyst. The resin and catalyst should be washed off quickly in soapy water if they come in contact with the skin. If in contact with the eyes flush with plenty of fresh water for 5 minutes. If irratation persist please seek medical help. Do not ingest and keep away from children.

Shipping

We use a Next Day Day Courier Service with Royal Mail or UK Mail dependant on Size of Kit.

Returns

We offer a 30 Day Resturn Policy with the returned items paid for at the buyers cost.