Flexitec 2020 SP Primer for EPDM and TPO Surfaces

A single component Primer to be used when the installation is to take place over an existing EPDM or TPO membrane.
£67.50
£81.00 (inc. VAT)

A single component Primer to be used when the installation is to take place over an existing EPDM or TPO membrane.

    Moisture curing within 2 to 4 hours
    Used to prime Single-Ply roof surfaces such as EPDM, TPO and PVC.
    To be used prior to application of the Resin.
    Coverage: 12-15 m2
    Mix the primer thoroughly by stirring or shaking before application.

Application: Brush-apply a thin coat of primer to the substrate. Avoid excess build-up of material in all areas, and especially in corners. If necessary, use the brush to spread the material evenly andavoid greater layer thicknesses.