Fillers

Fillers for the Marine and GRP Fibreglass Industries. We supply a range of Polyester and Epoxy Fillers suitable for all Marine Applications and to use alongside GRP Composite Materials. If you are unsure of which one is right for you please call us for technical support on the number at the top of the page.
Showing 11 of 11 results
  • UPOL  Easy One Filler

    UPOL Easy One Filler

    U-POL Easy One, is Multi-Purpose 2-Part Filler and is very easy to sand, light grey polyester filler, which hardens in as little as 20 minutes. It bonds strongly to wood, metal, concrete and GRP, does not slump and leaves a pinhole free dense surface after sanding.
  • F26 Poly Fair Polyester Filler

    F26 Poly Fair Polyester Filler

    Poly-Fair F26 is a water resistant, low-density polyester-based fairing compound. Poly-Fair F26 has good adhesion to cured fiber-reinforced polyester and vinylester laminates. 2kg and 12kg Available.
  • Gelcoat Filler - Clear

    Gelcoat Filler - Clear

    Clear Gelcoat Filler. Used with the addition of catalyst hardener (MEKP Organic Peroxide) for filling holes and cracks above and below the waterline. Can also be used in the repair of gloss coats on Caravans, Canoes and Camper Vans.
  • Gelcoat Filler - White

    Gelcoat Filler - White

    White Gelcoat Filler. Used with the addition of catalyst hardener (MEKP Organic Peroxide) for filling holes and cracks above and below the waterline. Can also be used in the repair of gloss coats on Caravans, Canoes and Camper Vans.
  • Polyurethane Expanding Foam

    Polyurethane Expanding Foam

    A 2 part liquid foam which when mixed together in equal parts can expand up to 25 times its original volume and set rigid. It is extremely buoyant. 1 cubic foot will support 27kg in water and will bond well to most materials.
  • Starchem Bridger - Glass Fibre Filler 2kg

    Starchem Bridger - Glass Fibre Filler 2kg

    All purpose 2kg Fibreglass Filler for use on GRP and Steel. Fibreglass strands within the body of the filler provide additional Strength. As a Bridging Product this can be used to fill Larger Holes and GRP Repairs. Comes with Catalyst.
  • Teroson UP 610 Marine Filler - Plastic Padding 341g

    Teroson UP 610 Marine Filler - Plastic Padding 341g

    MARINE FILLER is a white, polyester-based filler for all marine applications to fill and seal holes and cracks and is ideal for superstructure repairs above and below the waterline.
  • Hempel Marine Epoxy Filler 130ml

    Hempel Marine Epoxy Filler 130ml

    Hempel's Epoxy Filler is a two-component, solvent-free, epoxy filler. Especially suited for the repair of cracks, fissures and small imperfections.
  • Talc Filler Powder - Various Sizes

    Talc Filler Powder - Various Sizes

    Talc Powder is used for bulking out Resin for General class applications. Used to create an inexpensive filler paste by adding the Talc to Resin. Harder to sand than conventional bodyfiller but more waterproof.
  • Aluminium Trihydroxide Filler Powder

    Aluminium Trihydroxide Filler Powder

    Aluminium trihydroxide (also known as ATH) is a low-cost, inert, odourless filler powder than can be used to bulk-out, reduce shrinkage, add weight and add fire retardancy to casting resins including polyurethane, epoxy and polyester.
  • Mixing Board

    Mixing Board

    Mixing board for body fillers. 210mm x 250mm comprising of a hundred of removable paper sheets that ensures you have a clean surface to mix fillers every time.