Fibreglass Cloth, Fabric and Tape

Fibreglass Cloth, Woven Roving, Combination Cloth and a selection of CSM Tapes. Uni Directional Tape also available. Used within the Composite Boat Building, Industrial Composite and fibreglass Flat Roofing Industries.
Showing 15 of 15 results
  • 200g Plain Weave Fibreglass Cloth

    200g Plain Weave Fibreglass Cloth

    Plain weaves consists of yarns interlaced in an alternating fashion one over and one under every other yarn. Plain weave provides good fabric stability but is generally the least pliable.
  • 200g  Twill Weave Fibreglass Cloth

    200g Twill Weave Fibreglass Cloth

    Twill weave has good drapability, it is also a very ‘soft’ cloth that will laminate into awkward shapes and tight corners.
  • 300g Woven Roving

    300g Woven Roving

    Woven Roving is widely used in composite construction, with perfect properties of reinforcement, corrosion-resistance and insulation. Provides high tensile and flexural strength in laminates.
  • 600g Woven Roving

    600g Woven Roving

    600g Woven Roving is widely used in composite construction, with perfect properties of reinforcement, corrosion-resistance and insulation. Provides high tensile and flexural strength in laminates.
  • 450g Biax Matting +/- 45 - 1.27m Width Full Roll

    450g Biax Matting +/- 45 - 1.27m Width Full Roll

    Biaxial fabric is non woven which consists of 2 layers stitched together at +/- 45 deg. Drapes nicely, used in structural work as it gives strength in 2 directions. The + 45º and - 45º layers are of equal weight.

  • 600 / 300 Combination Matting +/- 45 - 1.27m Width

    600 / 300 Combination Matting +/- 45 - 1.27m Width

    Full Roll. This combination fibreglass fabric consists of a 600g woven cloth base layer to which 300g of chopped fibreglass strand is deposited. Useful for building layers rather than using individual materials separately.
  • 800 / 300 Combination Matting +/- 45 - 1.27m Width

    800 / 300 Combination Matting +/- 45 - 1.27m Width

    Full Roll. This combination fibreglass fabric consists of a 800g woven cloth base layer to which 300g of chopped fibreglass strand is deposited. Useful for building layers rather than using individual materials separately.
  • Carbon Fibre 205g 2x2 Twill Weave 3K - 1.27cm Width

    Carbon Fibre 205g 2x2 Twill Weave 3K - 1.27cm Width

    This is one of the most popular Carbon Fibre cloths available and sold by the Linear Metre. The 205g Weight refers to the weight of 1sqm of the fabric. Laminated this gives the Classic Carbon Fibre Weave Look and Feel to your finished project.
  • Peel Ply - 1m Wide

    Peel Ply - 1m Wide

    A finely woven fabric treated with a release agent to which epoxy and polyester resins will not adhere. Excellent for providing a release and reducing subsequent sanding prior to applying more resin.
  • T1777 Surface Tissue

    T1777 Surface Tissue

    Glassfibre Surface Tissue is a sheet of randomly orientated textile glass fibre. Surface tissue is used in applications where a smooth surface is desired. Surface tissue is available at different lengths and may be cut into a workable size.
  • Woven Fibreglass Cloth Tape - 50m

    Woven Fibreglass Cloth Tape - 50m

    Fibreglass Woven Tape for Roofing, Boat Building and Repair Applications. We are able to supply this in a range of Woven Tape Widths and Lengths depending on the size of your project.
  • 6mm Chopped Strands

    6mm Chopped Strands

    6mm Chopped Glass Strands used primarily to bulk out resin for use as a gap filler or adhesive paste for composite applications.
  • Chopped Strand Matting Tape/Bandage - 450g x 50m

    Chopped Strand Matting Tape/Bandage - 450g x 50m

    75mm Chopped Strand Matting Tape/Bandage - 450g x 50m. Used extensively for taping joins in OSB or Plywood Roofing Substrate prior to the Main Lamination Process. Also used for selective reinforcement in the boat building and industrial composite industries.
  • UDT Woven Roving 600 x 100 x 50m

    UDT Woven Roving 600 x 100 x 50m

    UDT or Uni Directional Tape used to Reinforce specific areas of a project in the direction of the fibres. This is a Woven Roving 600g Tape. 100mm wide and 50m Long.
  • UDT Woven Roving 600 x 150 x 50m

    UDT Woven Roving 600 x 150 x 50m

    UDT or Uni Directional Tape used to Reinforce specific areas of a project in the direction of the fibres. This is a Woven Roving 600g Tape. 150mm wide and 50m Long.